簡單介紹歐姆龍焊縫傳感器，日本OMRON焊縫傳感器電子樣本

    上海乾拓貿易有限公司

    企業(yè)QQ：2880626087

    電話；021-69001039

    手機；17321017802（微信）

    郵箱；17321017802@163.com

    地址：上海市嘉定區(qū)江橋嘉涌路99弄6號713室

    A region can be specified in the direction of the line beam. Data storage 2,048 points max.

    Inspection Capabilities of the Z510

    Inspect for welding flaws by measuring the bead shape. ? Accumulate and output the profile data.

    Greatly simplify the management of welding bead quality. ?

    The high-speed 10-ms measurement period allows in-line inspection. ?

    Automatic light intensity (brightness) adjustment provides stable measurement of fluctuating metal surfaces. ?

    The compact sensor head contains both the transmitter and receiver, so mounting space is not an

    General Specifications

    Characteristics

    Note: This resolution is for measurements with an OMRON K3AS Linear Sensor Controller connected and values averaged over 64 measurements.

    Insulation resistance 20 M? min. (at 100 V DC) between DC external terminals and GR terminal

    (with internal surge absorber removed) Dielectric strength 1,000 VAC, 50/60 Hz between DC external terminals and

    GR terminal (with internal surge absorber removed) Leakage current 10 mA max. Noise resistance 1,500 VP-P; pulse width:

    0.1 ?s/1 ?s; rising edge: 1-ns pulse Vibration resistance 10 to 150 Hz (double amplitude of 0.1 mm) for 8 minutes each in the X, Y,

    and Z directions Shock resistance 200 m/s2 3 times each in 6 directions Ambient temperature Operating: 0 to 50°C

    (with no icing or condensation) Storage: -15 to 60°C (with no icing or condensation) Ambient humidity Operating and storage: 35% to 85%

    Z300-KP (2-m cable)

    F150-VM  Monitor Cable (2 m)

    BNC Jack (Included with the F150-VM)

    Use the Monitor to check the image and  display menus when making

    F150-M05L Color Liquid Crystal Monitor (pin input)

    Item Specification Supply voltage 21.6 to 26.4 VDC Current consumption 1 A max. (with 2 Sensors connected)

    (with no condensation) Atmosphere No corrosive gases Grounding Less than 100

    ? Degree of protection IEC60529 IP20 (In-panel) Material Case: ABS

    Item Specification Number of Sensors Up to 2 Sensors can be connected. Number of scenes 16 Light intensity tracking function Automatic

    (The light intensity tracking range can be specified.) Fixed (Select one of 31 stages.)

    Measurement items Select one of the following 6 items: Deviation from reference surface

    , Bead height, Width, Bead change, Peak/Bottom, Inspection length Region specification

    Up to 2 Sensors can be connected.

    Products with the ★ are specialized devices and cannot be replaced with other models.

    Trigger function Free-run, External 1, External 2, or Auto Results output

    Terminal block 8 input points: TRIGGER, LD-OFF, RESET, DI0, and DI4 to DI7 12 output points

    :DO0 to DO5, DO8, DO15, DO17 to DO19, and GATE Monitor interface 1 channel (for pin jack or overscan monitor)

    Analog output resolution The full-scale output can be divided into 40,000 gradations max.

    Resolution (See note.): 0.25 mV (± 5 V) 0.4 ?A (4 to 20 mA) Weight Approx. 700 g (Controller only)

    ? Judgement output RS-232C output Terminal block output ? Measurement value output   (measurement value) RS-232C output Analog output

    Power supply

    Recommended model:  OMRON S82K-05024

    Z510-SW2T (0.5-m cable) Z510-SW6 (0.5-m cable) Z510-SW17 (0.5-m cable)

    Sensor Extension Cables Z519-SCIR (1.5 m, 3 m, 6 m, 8 m, 13 m, or 18 m) Specify the required cable length when ordering.、

   簡單介紹歐姆龍焊縫傳感器，日本OMRON焊縫傳感器電子樣本